Alterações no passo nº 3
Edição por Gurmeet Cheema —
Edição aprovada por Gurmeet Cheema
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Starting on the edge opposite the hinge, use plastic opening tools to pry the |
|---|---|
| - | [* black] |
| - | [* black] Leave a pry tool in the corners to ensure |
| - | [* icon_caution] DO NOT lift the back plate away from the computer, it is still connected to the motherboard |
| + | [* black] Starting on the edge, that is opposite the hinge, use plastic opening tools to pry the back plate away from the computer. |
| + | [* black] Loosen the three non-hinge edges. |
| + | [* black] Leave a pry tool in the corners to ensure that one side does not snap close before you are done opening the others. |
| + | [* icon_caution] DO NOT lift the back plate away from the computer, it is still connected to the motherboard. |