Alterações no passo nº 6
Edição por Matt Brunswick —
Edição aprovada por Matt Brunswick
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the two screws (left and right) from the white border on top of the circuit board. |
|---|---|
| + | [* black] Remove the two 9.82mm screws (left and right) from the white border on top of the circuit board. |
| [* black] Gently pull circuit board from affixed position. | |
| [* icon_note] The circuit board will not be completely separated at this point. |