Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Flip up the retaining flap on the I/O assembly ZIF connector.
+[* black] Use the tip of a spudger to flip up the retaining flap on the I/O assembly data ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, not the socket itself.
+[* black] Use the tip of a spudger to pull the I/O assembly data ribbon cable out of its socket.