Alterações no passo nº 1
Edição por Julian Sammy —
Edição recusada por Andrew Optimus Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use the tip of a spudger to peel back the cloth tape covering the headphone jack and the I/O assembly cable. | |
| - | [* icon_note] There is no need to completely remove the tape. Just peel it back enough so that the tape is only adhering to the ribbon cable and not the metal frame. |
| + | [* icon_note] There is no need to completely remove the tape. Just peel it back enough so that the tape is only adhering to the ribbon cable and not the metal frame. Some models do not have tape holding down the ribbon cable. |