Conserte seus objetos Comunidade Loja

Alterações no passo nº 6

Edição por Trevor Seyller —

Edição aprovada por Trevor Seyller

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Hold the bridge in one hand and tighten the A-string and D-string first. Then tighten the E-string and G-string. Tighten until each string matches its rough standard pitch (violin tuner suggested).
-[* icon_note] ***Remember to adjust the bridge a little to keep it perpendicular to the violin body everytime you tighten the string, and not too far away from the f-holes.***
-[* black] After tightening all four strings, try to play a little for test. ***If the distance between strings is not comfortable for performance ***(as noted in step 4), ***repeat step 2-6*** and adjust the distance between strings on bridge again to find the proper distance.
+[* black] Hold the bridge in one hand and tighten the strings in the reverse order you loosened them. Tighten the A-string and D-string first. Then tighten the E-string and G-string. Tighten until each string matches its rough standard pitch (violin tuner suggested).
+[* icon_note] Continue to adjust the bridge to keep it perpendicular to the violin body every time you tighten the string so it is not leaning too far away from the f-holes.
+[* black] After tightening all four strings, play a little to test the string placement. ***If the distance between the strings is not comfortable for performance ***(as noted in step 4), ***repeat step 2-6*** and adjust the distance between the strings on the bridge again to find the proper distance.