Ir para o conteúdo principal

Alterações no passo #3

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
-[* black] Gently pry up the right fan ribbon cable from the logic board.
+[* black] Starting at the top of the cable, slide a plastic opening tool under the right fan cable to free it from the logic board.
+[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to the logic board.