Ir para o conteúdo principal

Alterações no passo #3

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the tip of a spuder to flip up the retaining flap on the right fan ZIF connector.
+[* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
[* black] Gently pry up the right fan ribbon cable from the logic board.