Ir para o conteúdo principal

Alterações neste passo

Edição por nicolay.94

Edição aprovada por nicolay.94

Antes
Depois
Sem alteração

Linhas de Passo

+[title] Display Assembly
+[* black] Use the flat end of a spudger or a fingernail to disconnect the two lower display connectors by prying them straight up from their sockets on the logic board.
+[* black] To re-attach press connectors, press down on one end until it clicks into place, then repeat on the other end. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.