Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Mario Olivio Flores —

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Next we need to detach some ribbon cables and an antenna cable from the main circuit board.
[* red] Micro USB board. Also has the front notification LED and the main microphone.
[* yellow] Screen connector.
[* violet] Volume rocker. Some phones have reported the cable isthis soldered to the mainboard. This wasmainboard - not CDMA.
[* black] GSM/Soldered: One user was able leave the casevolume rocker alone, and instead focus on this CDMA version. It may be solderedthe power button. You can gently separate the power button from the case - held in newer revisions orplace only by glue - without remove detaching it from the circuit board. You can then rotate the GSM modelcircuit board out of your way.
[* violet] Volume rocker. Some phones have reported the cable isthis soldered to the mainboard. This wasmainboard - not CDMA.
[* black] GSM/Soldered: One user was able leave the casevolume rocker alone, and instead focus on this CDMA version. It may be solderedthe power button. You can gently separate the power button from the case - held in newer revisions orplace only by glue - without remove detaching it from the circuit board. You can then rotate the GSM modelcircuit board out of your way.
[* green] Antenna.
[* black] Gently detach with the plastic opening tool.