Alterações no passo #6
Edição por Sam Thompson —
Edição aprovada por Sam Thompson
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Next we need to detach some ribbon cables and an antenna cable from the main circuit board. |
| [* red] Micro USB board. Also has the front notification LED and the main microphone. |
| [* yellow] Screen connector. |
| [* violet] Volume rocker. Some have reported the cable is soldered to the mainboard. This was not the case on this CDMA version. It may be soldered in newer revisions or the GSM model. |
| [* violet] Volume rocker. Some have reported the cable is soldered to the mainboard. This was not the case on this CDMA version. It may be soldered in newer revisions or the GSM model. |
| [* green] Antenna. |
| [* black] Gently detach with the plastic opening tool. |