Ir para o conteúdo principal

Alterações no passo #8

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* icon_caution] Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short.
[* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board.
[* black] Squeeze the tab on the far side of the DC power cable connector tab and pull itthe connector straight out of its socket on the back of the logic board.
[* black] Squeeze the tab on the far side of the DC power cable connector tab and pull itthe connector straight out of its socket on the back of the logic board.