Ir para o conteúdo principal

Alterações no passo #8

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* icon_caution] Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short.
[* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board.
[* black] Squeeze the tab[https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ|the tab|new_window=true] on the far side of the DC power cable connector and pull
[* black] Pull
the connector straight out of its socket on the back of the logic board.
[* black] Squeeze the tab[https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ|the tab|new_window=true] on the far side of the DC power cable connector and pull
[* black] Pull
the connector straight out of its socket on the back of the logic board.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado