Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por gordonhamachi

Edição aprovada por gordonhamachi

Antes
Depois
Sem alteração

Linhas de Passo

[title] Remove Ribbon Cables
[* black] Remove the two screws adjacent to the translucent cover.
[* black] Peel back the translucent cover. Remove the two narrow white ribbon cables by gently pulling up on their collars to release the connector, and then sliding the ribbon cable out.
[* black] Remove the metal cover held down by two screws. Remove the additional screw to the right of
the Keyboard (Part 2)cover. See second photo.
[* black] Detach the keyboard ribbon cable from the connector by gently pulling up on the long white collar to open the connector. See third photo.
[title] Remove Ribbon Cables
[* black] Remove the two screws adjacent to the translucent cover.
[* black] Peel back the translucent cover. Remove the two narrow white ribbon cables by gently pulling up on their collars to release the connector, and then sliding the ribbon cable out.
[* black] Remove the metal cover held down by two screws. Remove the additional screw to the right of
the Keyboard (Part 2)cover. See second photo.
[* black] Detach the keyboard ribbon cable from the connector by gently pulling up on the long white collar to open the connector. See third photo.
[* black] Detach the blue ribbon cable in the same manner.
[* black] Detach the white ribbon cable from the connector by gently pulling the gray connector collar toward you.
[* black] Detach the black display ribbon cable by gently pulling it straight up off the motherboard.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado