Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por teut986

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] As the 6 series is slightly higher we need to make a little space on the plastic holder which is beneath the card
[* black] Remove the plastic part which is shown on the 2nd picture by removing one screw and carefully pull it from the aluminium case
[* black] Its fastended with tape, so don't worry, you can't break anything
[* black] Some wiggling and nagivating it from the cables and you should have it in your hands
[* black] You see the rectangular space where the large cable goes through. Use a saw or other tool to make it about 5mm wider and 2-3mm deeper
[* black] The third image shows the final result we want to achieve
[* black] The primary reason for thi step is the heatpipe of the 6 series which takes more space
[* black] Note: this is ONLY necessary on the late 2009 model, 2010 models already got enough room!

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado