Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Padraic Hoselton

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* blackred] Now remove these 3 T9 Torx screws from the graphics card bezel seen in the left imagebezel.
[* blackred] Now remove these 3 T9 Torx screws from the graphics card bezel seen in the left imagebezel.
[* black] Locate the large heatsink from the graphics card, which should be right above your DvD drive
[* blackorange] Remove the single screw there holding it in place
[* blackyellow] Carefully remove the graphics card temperature sensor cable from underneath the motherboard
[* blackicon_reminder] Remember the position as you need to plugin the new one here as well
[* blackorange] Remove the single screw there holding it in place
[* blackyellow] Carefully remove the graphics card temperature sensor cable from underneath the motherboard
[* blackicon_reminder] Remember the position as you need to plugin the new one here as well