Alterações no passo nº 11
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] If you were unable to remove all the EMI shields, use compressed air or a blow-dryer on its cold setting to blow underneath the shields and dry out any trapped alcohol. | |
| - | [* black] When all components look clean and dry, reapply any EMI shields that you removed and loosely reassemble the phone with a new battery, and a new display if necessary. |
| - | [* icon_note] Do not apply any adhesive or finish assembling the phone. Make sure everything is plugged in, but do not apply adhesive or replace external screws to retain easy access to internal parts. |
| - | [* icon_caution] Lithium and other types of rechargeable batteries do not tolerate submersion well. Again, any sign of bubbling, bulging, melting, or discoloration on the battery indicates that it is toast. Use a fireproof (glass, ceramic, or metal) container for temporary storage and transportation to a battery recycling facility. |
| - | [* icon_note] See [http://www.call2recycle.org/safety/damaged-defective-and-recalled-batteries/|this site|new_window=true] for safety guidelines regarding damaged batteries. Make sure to recycle your old battery and other e-waste at a [[E-Waste|certified recycler|new_window=true]]. |
| + | [* black] When all components look clean and dry, reapply any EMI shields that you removed and begin to reassemble the phone with a new battery, and a new display if necessary. |
| + | [* black] Do not completely assemble the phone yet. Make sure internal components are screwed down and everything is plugged in, including the battery and display cable, but do not apply adhesive, replace external screws, or seat the display. |
| + | [* icon_note] It is safe to start the phone like this, but turn the phone back off before you start working inside it again. We just want to test the phone while keeping the internals accessible in case there are any problems. |