Ir para o conteúdo principal

Alterações no passo #9

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a detail brush to gently scrub away any corrosion and liquid residue on the logic board and other components.
[* icon_caution] Be carful not to push down too hard with the brush on delicate logic board components.
[*
icon_note] Pay special attention to flexcable ends, battery contacts, connectors, pins, and fuses as corrosion on these parts are prone to corrosion and can easily cause the phone to malfunction.
[* icon_caution] Be carful not to push down too hard with the brush on delicate logic board components.
[*
icon_note] Pay special attention to flexcable ends, battery contacts, connectors, pins, and fuses as corrosion on these parts are prone to corrosion and can easily cause the phone to malfunction.
[* black] If needed, repeat steps 9 and 10 until all corrosion and residue is gone.