Conserte seus objetos Comunidade Loja

Alterações no passo nº 9

Edição por Adam O'Camb —

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Use a detail brush to scrub away any corrosion and debris on the logic board and other components.
+[* black] Use a detail brush to gently scrub away any corrosion and liquid residue on the logic board and other components.
[* icon_note] Pay special attention to flex ends, battery contacts, connectors, pins, and fuses as corrosion on these parts can easily cause the phone to malfunction.
-[* black] If needed, repeat steps 9 and 10 until all corrosion and debris is gone.
+[* black] If needed, repeat steps 9 and 10 until all corrosion and residue is gone.