Alterações no passo nº 9
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use a detail brush to scrub away any corrosion and debris on the logic board and other components. |
|---|---|
| + | [* icon_note] Pay special attention to flex ends, battery contacts, connectors, pins, and fuses as corrosion on these parts can easily cause the phone to malfunction. |
| + | [* black] If needed, repeat steps 9 and 10 until all corrosion and debris is gone. |