Alterações no passo nº 8
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] Isopropyl alcohol is a mild skin and eye irritant. Use gloves and eye protection while working with isopropyl alcohol. | |
| [* black] Fill your container with high concentration isopropyl alcohol (90% or greater) and submerge the logic board and any other components that show signs of corrosion, debris, or other liquid damage. | |
| [* icon_caution] Do not submerge the display or camera modules, even if they are damaged. Submerging them in alcohol will likely damage them further. | |
| - | [* black] Allow everything to soak for 5-10 minutes, or long enough to loosen hardened residue, |
| + | [* black] Allow everything to soak for 5-10 minutes, or long enough to loosen hardened residue. Swish the parts around a little as well, to displace any trapped liquid. |