Alterações no passo nº 8
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Fill your container with high concentration isopropyl alcohol (greater than 90%) and submerge the logic board and any other components that show signs of corrosion, debris, or other liquid damage. |
|---|---|
| + | [* black] Allow everything to soak long enough to loosen hardened residue, and to displace any remaining water or other liquid. |
| + | [* icon_caution] Do not submerge the display, even if it is damaged. Submerging it in alcohol will likely damage the display further. |