Ir para o conteúdo principal

Alterações no passo #8

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Sem alteração

Linhas de Passo

[* black] Fill your container with isopropyl alcohol and submerge the logic board and any other components that show signs of corrosion, debris, or other liquid damage.
[* black] Allow everything to soak long enough to loosen hardened residue, and to displace any remaining water or other liquid.
[* icon_caution] Do not submerge the display, even if it is damaged. Submerging it in alcohol will likely damage the display further.