Histórico do passo nº 6 do guia iPhone Liquid Damage Repair - iFixit

Alterações no passo nº 6

Edição por Adam O'Camb — 14 de jul de 2017

Edição aprovada por Adam O'Camb

: Antes
: Depois
: Sem alteração

Linhas do passo

-	[* black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s\|signs of corrosion\|new_window=true], especially in areas where the liquid contact indicators are red.
-	[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical.
-	[* black] If all liquid contact indicators are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone.
-	[* black] If there are signs of moisture, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.
+	[* icon_note] If you phone was fully submerged for any amount of time, it is likely some of the internal components [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s\|corroded\|new_window=true]. Corrosion looks like a white, chalky film covering pins and connectors, and is especially prevalent on those that carry current. Corrosion dissolves metals and will cause malfunctions in your phone.
+	[* black] Inspect the logic board and any connectors for signs of corrosion, especially in areas where the LCIs are red.
+	[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical.
+	[* black] If all LCIs are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone.
+	[* black] If any LCIs are red, there is corrosion, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.