Ir para o conteúdo principal

Alterações no passo #6

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signs of corrosion|new_window=true], especially in areas where the liquid contact indicators are red.
[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replacedreplaced if cleaning is not practical.
[* black] If thereall liquid contact indicators are white, and there is no signs of moisturemoisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped water evaporatesliquid evaporates, then reassemble the phone.
[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replacedreplaced if cleaning is not practical.
[* black] If thereall liquid contact indicators are white, and there is no signs of moisturemoisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped water evaporatesliquid evaporates, then reassemble the phone.
[* black] If there are signs of moisture, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.