Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #1

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_noteicon_reminder] If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
[* icon_noteicon_reminder] If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[* black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a Halberd spudger along the edge of the sensor to cut some of the adhesive. This will make the adhesive less likely to be reusable, however.