Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #1

Edição por Jeff Suovanen

Edição aprovada de Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] If you're reusing the rear glass panelpanel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel.
[*
panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* icon_note] If you're reusing the rear glass panelpanel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel.
[*
panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a Halberd spudger along the edge of the sensor to cut some of the adhesive. This will make the adhesive less likely to be reusable, however.