Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #1

Edição por Jeff Suovanen

Edição aprovada de Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_reminder] If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[* black] Push gently but firmly against the fingerprint sensor off of its adhesive from the outsideoutward-facing side of the glassglass panel, until the adhesive securing it separates.
[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a Halberd spudgerpick along the edge of the sensor to cut some of the adhesive. This will make the adhesive less likely to be reusable, however.
[* black] Push gently but firmly against the fingerprint sensor off of its adhesive from the outsideoutward-facing side of the glassglass panel, until the adhesive securing it separates.
[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a Halberd spudgerpick along the edge of the sensor to cut some of the adhesive. This will make the adhesive less likely to be reusable, however.

Imagem 2

Versão Antiga

Nova Versão