Alterações neste passo
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] In the following steps you will be cutting through the adhesive around the edge of the rear glass panel. |
| [* black] The adhesive on the rear case is laid out as seen in the first image. |
| [* black] The prying pattern as seen from the outside of the phone is as follows: |
| [* red] Thick portions of adhesive |
| [* orange] Thin areas of adhesive |
| [* yellow] Avoid prying here, to protect the fingerprint sensor. |