Alterações no passo nº 8
Linhas do passo
| [* black] Start to turn the tuning peg counter clockwise, keeping the half inch piece of string on top of the string which is being wound around the tuning peg. | |
| - | [* icon_note] This will stop the string from jumping over the tuner |
| + | [* icon_note] This will stop the string from jumping over the tuner, making a tighter string. |
| [* icon_note] Make sure that the string is laying on top of the tuner as seen in the picture. | |
| [* icon_note] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it. |