Ir para o conteúdo principal

Alterações no passo #3

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Wedge the flat end of a spudger in between the "" cable and connector and gently wiggle the cable out of its connector.
+[* black] Insert the flat end of a spudger into the gap between the optical drive data cable connector and its socket.
+[* black] Twist the spudger to separate the connector from its socket.
+[* icon_note] It is helpful to work from alternating sides to "walk" the connector out of its socket.