Ir para o conteúdo principal

Alterações no passo #2

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] To remove the optical drive thermal sensor, use the tip of a spudger to lift the center finger of the thermal sensor bracket while applying slight tension to the thermal sensor cable.
+[* icon_note] If your thermal sensor is stuck to the optical drive, use the flat end of a spudger to pry the thermal sensor bracket off the drive.
+[* icon_note] If the adhesive on the bracket refuses to stick, apply some double stick tape to the underside of both flat bracket ears.