Skip to main content

Alterações no passo #2

Edição por Adam O'Camb

Edição aprovada by Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] If the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements.
[* black] After removing the old adhesive, clean the edges of the fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive.
[* icon_reminder] You may also need to transfer the camera bezel to your new part, if that's the case, follow our [guide|122484|camera bezel replacement guide|stepid=236006|new_window=true].