Pular para o conteúdo principal

Alterações no passo #2

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereIf the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements.
[* black] After removing the old adhesive, clean the edges of the fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive
.
[* black] Insert wisdom hereIf the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements.
[* black] After removing the old adhesive, clean the edges of the fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive
.