Skip to main content

Alterações no passo #1

Edição por Adam O'Camb

Edição aprovada by Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
[*
black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[*

[*
black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* black] If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing.
[* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first.