Alterações no passo nº 3
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can |
|---|---|
| - | [* icon_note] The suction cup will not make a good seal on the curved portion of the glass. |
| - | [* black] Lift on the suction cup, and insert a halberd spudger |
| + | [* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can. |
| + | [* icon_note] The suction cup will not make a good seal on the curved portion of the glass, so avoid putting it on the very edge. |
| + | [* black] Lift on the suction cup, and insert a halberd spudger or opening pick under the rear glass. |