Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #7

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackicon_note] The fingerprint sensor cable connects the phone to the rear glass near the main camera. The cable is very short and should disconnect as the rear glass is removed.
[* blackicon_caution] As you lift the glass, peek in to be sure the orange cable with a blue connector has disconnected.
[* blackicon_note] The fingerprint sensor cable connects the phone to the rear glass near the main camera. The cable is very short and should disconnect as the rear glass is removed.
[* blackicon_caution] As you lift the glass, peek in to be sure the orange cable with a blue connector has disconnected.
[* black] Use the opening picks to slice through any remaining adhesive and open the phone slightly.
[* blackicon_caution] If the fingerprint sensor cable seems snagged or stays taught do not open the phone any further. Disconnect the connector with the point of a spudger before proceeding.
[* blackicon_caution] If the fingerprint sensor cable seems snagged or stays taught do not open the phone any further. Disconnect the connector with the point of a spudger before proceeding.
[* black] Remove the glass from the phone.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado