Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #3

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Slide an opening pick up the side of the battery to break apart any remaining adhesive.
[* black] Lift the battery out of the case.
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
[*
icon_reminder] Be sureTo install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order
to position it correctly, apply the new adhesive tointo the phone, not directly onto the battery. The adhesive should go around the perimeter of the replacement battery andcompartment, but not in the rear glass during reassemblyrectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
.
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
[*
icon_reminder] Be sureTo install a new battery:
[* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
[* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order
to position it correctly, apply the new adhesive tointo the phone, not directly onto the battery. The adhesive should go around the perimeter of the replacement battery andcompartment, but not in the rear glass during reassemblyrectangular cutout in the center (which is actually the back side of the display).
[* black] Press the battery firmly into place for 5-10 seconds
.