Alterações no passo nº 3
Edição por Tobias Isakeit —
Edição aprovada por Tobias Isakeit
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Grab the iOpener once again to heat up the bottom and top part to further soften the glue. |
|---|---|
| + | [* black] Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top. |
| + | [* icon_caution] Don't open the display all the way. It is still connected to the motherboard. |
| + | [* icon_note] If your display is still working you also want to leave the top part alone to not risk cutting any flex cables. If your display is already cracked—grab an opening pick and loosen the top part too. |
| + | [* icon_reminder] The home button may stick to the display assembly or remain on the midframe. Keep an eye on it if your new display assembly does not come with one already attached. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado