Alterações no passo #2
Edição por Daniel Luo —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* red] Using a Phillips #0 screwdriver, remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard. |
| [* black] Once this screw has been removed. Unplug these two wires by gently puling them up and away from the motherboard. Hold the wire as close to the end as possible. |
| [* black] Once this screw has been removed. Unplug these two wires by gently puling them up and away from the motherboard. Hold the wire as close to the end as possible. |