Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Devon Paul —

Edição aprovada por Devon Paul

Antes
Depois
Sem alteração

Linhas de Passo

[* red] RemoveUsing a Phillips #0 screwdriver, remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
[* red] RemoveUsing a Phillips #0 screwdriver, remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
[* black] Once this screw has been removed. Unplug these two wires by gently puling them away from the motherboard. Hold the wire as close to the end as possible.