Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Daniel Leon-Gijon

Edição aprovada por Daniel Leon-Gijon

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the single Xmm3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
[* red] Remove the single Xmm3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
[* black] Once this screw has been removed. Unplug these two wires by gently puling them away from the motherboard. Hold the wire as close to the end as possible.