Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Arthur Shi —

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Slightly liftRemove the motherboard usingfingerprint sensor.
[* icon_reminder] To reinstall the plastic opening toolfingerprint sensor, it is easier to attach it to access the motherboard first before positioning it in its indentation.
[* black] Align the fingerprint sensor's connector which holdsto the motherboard fromsocket, which is located on the bottom.
[* red] Disconnectunderside near the battery edge.
[* black] Use your finger to press the connector by pulling it away frominto the boardsocket. '''Do not use excessive force!''' The connector should click into position if done correctly.
[* black] Slightly liftRemove the motherboard usingfingerprint sensor.
[* icon_reminder] To reinstall the plastic opening toolfingerprint sensor, it is easier to attach it to access the motherboard first before positioning it in its indentation.
[* black] Align the fingerprint sensor's connector which holdsto the motherboard fromsocket, which is located on the bottom.
[* red] Disconnectunderside near the battery edge.
[* black] Use your finger to press the connector by pulling it away frominto the boardsocket. '''Do not use excessive force!''' The connector should click into position if done correctly.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado