Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.
[* redblack] Use the T5 screwdriverpoint of a spudger to removepry up and disconnect the two black 4mm screws which holdinterconnect cable from the screen connector shield in placemotherboard.
[* black] Gently removeicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the metal screen connector shieldsocket.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado