Ir para o conteúdo principal

Alterações no passo #4

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon cablecable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.
[* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable
Be careful not to overheat the battery.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon cablecable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.
[* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable
Be careful not to overheat the battery.