Ir para o conteúdo principal

Alterações no passo #4

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Prepare[guide|25705|Prepare an iOpeneriOpener|new_window=true] and lay it on top of the trackpad ribbon cable.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.

[* black] Leave it in placeApply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable to the battery.
[* black] Prepare[guide|25705|Prepare an iOpeneriOpener|new_window=true] and lay it on top of the trackpad ribbon cable.
[* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch.

[* black] Leave it in placeApply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable to the battery.