Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #2

Edição por Nick

Edição aprovada de Nick

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Remove the drive clip
[* blackicon_note] This step is not required if you are moving the drive to a Dell computer with the same mounting bracket or for Depot service and want to retain the hard drive.
[* red
] To remove the drive clip, remove the one'''Phillips #0''' screw fromholding the left side that holdshard drive to the drive in. Use a '''Phillips #0''' bit for this stepclip.
[* blackorange] Once the screw is removed, pullremove the clip offdrive starting from the left side ofwith the drive clipscrew.
[* icon_note] The right side ofyellow] Remove the clip is used for drive alignment. Because of this, there is no screw onfrom the right side ofby removing the drive clip.
[* icon_reminder] If you are using this guide to remove
from the hard drive to install into another Dell computer that uses the same clip or removing it before sending the system to Depot, these steps are not requiredalignment pin.
[* blackicon_note] This step is not required if you are moving the drive to a Dell computer with the same mounting bracket or for Depot service and want to retain the hard drive.
[* red
] To remove the drive clip, remove the one'''Phillips #0''' screw fromholding the left side that holdshard drive to the drive in. Use a '''Phillips #0''' bit for this stepclip.
[* blackorange] Once the screw is removed, pullremove the clip offdrive starting from the left side ofwith the drive clipscrew.
[* icon_note] The right side ofyellow] Remove the clip is used for drive alignment. Because of this, there is no screw onfrom the right side ofby removing the drive clip.
[* icon_reminder] If you are using this guide to remove
from the hard drive to install into another Dell computer that uses the same clip or removing it before sending the system to Depot, these steps are not requiredalignment pin.