Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #1

Edição por Nick

Edição aprovada de Nick

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Remove the chassis screws
[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the '''Phillips #1''' bit to do this.
[* icon_caution] The second screw,screw marked in orange is directly screwed into the chassis. DO NOT overtighten'''If this screw. If you do thisscrew is overtightened, the hard drive clip will break in this area and you will need to replace it, since there are only 2 screws that hold the hard drive in.be replaced.'''
[* icon_caution] The second screw,screw marked in orange is directly screwed into the chassis. DO NOT overtighten'''If this screw. If you do thisscrew is overtightened, the hard drive clip will break in this area and you will need to replace it, since there are only 2 screws that hold the hard drive in.be replaced.'''