Ir para o conteúdo principal

Fix Your Stuff

Right to Repair

Parts & Tools

Alterações no passo #1

Edição por Nick

Edição aprovada de Nick

Excluído
Adicionado
Sem alteração

Linhas de Passo

[title] Remove the chassis screws
[* black] To remove the hard drive from the computer, remove the two screws holding it in. Use the '''Phillips #1''' bit to do this.
[* icon_caution] The second screw, marked in orange is directly screwed into the chassis. DO NOT tightenovertighten this very far when reassembling, asscrew. If you do this, the clip will break here. It isn't the end of the world ifin this happens, butarea and you will need to replace it to ensureit, since there are only 2 screws that hold the hard drive doesn't fall out, should you lose the other screwin.
[* icon_caution] The second screw, marked in orange is directly screwed into the chassis. DO NOT tightenovertighten this very far when reassembling, asscrew. If you do this, the clip will break here. It isn't the end of the world ifin this happens, butarea and you will need to replace it to ensureit, since there are only 2 screws that hold the hard drive doesn't fall out, should you lose the other screwin.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado