Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Marcos Serrano —

Edição aprovada por Marcos Serrano

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Prepare the PH1 screwdriver, on our iFixit Pro Tech Toolkit, we used the driver with the 4mm extension and PH1 driver on the 4mm extension. (See first picture)
+[* black] Prepare the PH1 screwdriver from our iFixit Pro Tech Toolkit. Use the driver with the 4mm extension by inserting the 4mm extension into the PH1 driver. (See first picture)
[* red] On the bottom of the device, there are four PH1 screw heads. These need to be unscrewed to get to the inside of the device.