Alterações neste passo
Edição por Sam Goldheart —
Edição aprovada por Sam Goldheart
- Antes
- Depois
- Sem alteração
Linhas de Passo
[* icon_note] The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended. |
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting. |
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener. |
[* black] Place the iOpener over the home button on the front edge of the display. |
Imagem 1
Nenhuma imagem anterior
Adicionado